Coral’s commercial storefront systems can be customized to meet your specific requirements. Our team will work with you to choose the best storefront system for your commercial project. Choose from impact resistant storefronts, thermal and non-thermal storefronts as well as center set or front set systems.
Series FL100 System, 1 3/8″ x 2 1/2″ center set framing system for 1/4″,3/8″ or 1/2″ glazing in-fill is designed for Permanent or Removable Interior Office Partitions. Snap-together profiles using integral screw-spline joinery allows for the frames to be pre-assembled in panels resulting in increased productivity and quality control. Extruded Perimeter Wall profiles for 4-5/8″ and 4-7/8″ thick walls available providing clean finish trim for covering unfinished wall perimeters. Note: Intended for interior applications only, not tested for exterior applications.
Series FL200 non-thermal 1 3/4″ x 4 1/2″ center set storefront framing system for 1/4″ glass is designed for low-rise applications. Snap-together profiles using integral screw-spline joinery allows for the frames to be pre-assembled in panels resulting in increased productivity and quality control. Perimeter profiles with full-depth pockets eliminate the need for filler plates and provide direct anchoring to the substrate with excellent water control.
Series FL300 non-thermal 2″ x 41/2″ center set storefront framing system for 1″ glass is designed for low-rise applications. Snap-together profiles using integral screw-spline joinery allows for the frames to be pre-assembled in panels resulting in increased productivity and quality control. Perimeter profiles with full-depth pockets eliminate the need for filler plates and provide direct anchoring to the substrate with excellent water control.
Series FL300T thermal 2″ x 4-1/2″ center set storefront framing systems for 1″ glass is designed for low-rise applications. Enhanced thermal performance is achieved using thermal break construction in response to increased demands for energy efficient commercial buildings. Snap-together profiles using integral screw-spline joinery allows for the frames to be pre-assembled in panels resulting in increased productivity and quality control.
Series FS400T thermal 2″ x 4-1/2″ front set storefront framing system for 1″ glass is designed for low-rise applications. Snap-together profiles using integral screw-spline joinery allows for the frames to be pre-assembled in panels resulting in increased productivity and quality control. Perimeter profiles with full-depth pockets eliminate the need for filler plates and provide direct anchoring to the substrate with excellent water control.
Series FL600 non-thermal 2 1/4″ x 6″ storefront framing system for 1″ glass is designed for low-rise applications. Snap-together profiles using integral screw-spline joinery allows for the frames to be pre-assembled in panels resulting in increased productivity and quality control.
Series FL600T thermal 2 1/4″ x 6″ storefront framing system for 1″ glass is designed for low-rise applications. Snap-together profiles using integral screw-spline joinery allows for the frames to be pre-assembled in panels resulting in increased productivity and quality control.
Series FL600T thermal 2-1/4″ x 6″ storefront framing system for 1″ glass is designed for low-rise applications. Enhanced thermal performance is achieved using thermal break construction in response to increased demands for energy efficient commercial buildings.
Series FL500 is a non-thermal 2 ½” x 5″ hurricane impact-resistant center set storefront that accepts 9/16″ monolithic laminated safety glass designed and engineered for wind-borne debris applications. FL500 impact-resistant storefront is fully tested in accordance with ASTM an Florida Building Code standards for large missile impact and is approved for use in south Florida’s High Velocity Hurricane Zone and coastal areas considered wind-borne debris regions.
Series FL550 is a non-thermal 2 1/2″ x 5″ impact-resistant center set storefront that accepts 1 5/16″ insulated laminated safety glass designed and engineered for wind-borne debris applications. FL550 impact-resistant storefront is fully tested in accordance with ASTM and Florida Building Code standards for large missile impact and is approved for use in south Florida’s High Velocity Hurricane Zone and coastal areas considered wind-borne debris regions. In addition the FL550 system with the integral Series 381 entrances meets the Federal Government’s standards on anti-terrorism forced protection.
Series FL550T is a thermally broken 2 1/2″ x 5″ impact-resistant center set storefront that accepts 1 5/16″ insulated laminated safety glass designed and engineered for wind-borne debris applications. FL550T impact-resistant storefront is fully tested in accordance with ASTM and Florida Building Code standards for large missile impact and is approved for use in south Florida’s High Velocity Hurricane Zone and coastal areas considered wind-borne debris regions.